Turck

Comat Releco

Relay

Industrial controls > Relays > Electromechanical

C10 series

Interface electromechanical relay

LED indicator
built-in polarity & freewheeling diodes
signal type
Gold-clad contacts
Built-in freewheeling diode dampens transients caused by the relay coil on de-energisation.
Built-in diode in series with the coil protects the relay from reverse connection

single-pole / 1-pole (1P)

1GΩ min. insulation resistance (at 500V)

10A (250Vac; AC-1; IEC rating)
13A (250Vac; AC-1; UL cURus rating)
0.5A (110Vdc; DC-1)
10A (30Vdc; DC-1)
0.2A (220Vdc; DC-1)
30A inrush current max. (20ms)
5mA min. low-level current (at 5V)

2500VA max. switching (AC load)

100mVdc...5Vdc

100mVac...5Vac

(IEC 61810-1) 4 kV

open contacts (RMS; 1min) 1000 V
between adjacent poles (RMS; 1min) 2500 V
between contacts and coil (RMS; 1min) 2500 V

plug-in 5-pin spades

pick-up voltage ≤ 0.8 x Un (19.2Vac) -- relay is guarantee to close at 19.2Vac input and above
release voltage ≥ 0.1 x Un (2.4Vac) -- relay is guarantee to be opened at 2.4Vac input or below

24Vdc
pick-up voltage ≤ 0.8 x Un (19.2Vdc) -- relay is guaranteed to close at 19.2Vdc input and above
release voltage ≥ 0.1 x Un (2.4Vdc) -- relay is guaranteed to be opened at 2.4Vdc input or below

Plug-in mounting

Pick-up time 10ms / 0.01 s
Pick-up bounce time ≤ 1ms / 0.001 s
Release time 5ms / 0.005 s
Release bounce time ≤ 3ms / 0.003 s

1C/O / SPDT (Single-Pole Double-Throw) contact

IP40

H28.8mm x W13mm x D35.4mm

Gold-clad Silver-Nickel (AgNi + 5μm Au flash) contacts

-40°F...+158°F / -40°C...+70 °C

-40°F...+176°F / -40°C...+80 °C

0.7 W

(AC) 10 000 000 / (DC) 20 000 000 operations

R8803
C10-A18FX/024VDC

Commercialized

R8803
C10A18FX024VDC

CE
cURus
IEC/EN 61810
IEC/EN 60947
EAC
RoHS
CCC

Product range
ComatReleco offers a wide range of relay types and versions and associated sockets and accessories.

Interface Relays
C10‚ C12‚ C16‚ C18 Overall width 13mm with up to 2 electromechanical contacts or fully electronic switches.

Special relays and remanence relays
While "normal" relays are monostable‚ they return to the idle state when the excitation is switched off. Remanence relays are bistable.
The current switching state is retained irrespective of the excitation.
Relays of this type are available in different versions.

Accessories
Suitable sockets are available for the different relay series for DIN rail mounting or panel mounting.
In addition retaining clips are available for the relays and some of which are included in the scope of supply.
Suitable bridges for cost-saving wiring in series are also available.