PULS

Power supply unit

DIMENSION series

C-Line series

AC/DC Power supply unit (PSU) / converter
20% power reserve

passive PFC
20% power reserve
DC-OK rly. contact output

85Vac-132Vac / 184Vac-264Vac (100Vac / 110Vac / 120Vac / 200Vac / 208Vac / 220Vac / 230Vac / 240Vac nom.; 47-63Hz) (auto select)
80Vac turn-ON voltage
75Vac shutdown voltage (steady-state)

"DC-OK" LED

Single-phase (1AC)

10A (at 24Vdc)
8.6A (at 28Vdc)

288W (ambient less than 45°C)
240W (ambient less than 60°C)

24Vdc-28Vdc (adjustable)
100mV turn-ON overshoot

42ms (buffer time at 230Vac input)
46ms (buffer time at 120Vac input)

screw-clamp connections

output overvoltage protection (34Vdc typ. / 39Vdc max.)
active (input inrush current limiter)
Overload / short-circuit current -- min. 14A (max. 18A) at load impedance <100mΩ
Series / parallel operation -- Power supplies can be paralleled for redundancy to gain higher system availability. Redundant systems require a certain amount of extra power to support the load in case 1 power supply unit fails. The simplest way is to put 2 power supplies in parallel. This is called a 1+1 redundancy. In case 1 power supply unit fails the other 1 is automatically able to support the load current without any interruption
Back-feeding loads max. 35V -- The unit is resistant and does not show malfunctioning when a load feeds back voltage to the power supply. It does not matter whether the power supply is ON or OFF. The absorbing energy can be calculated according to the built-in large sized output capacitor.

0.912 (230Vac input)
0.91 (120Vac input)
0.907 (100Vac input)

DIN rail mounting

850ms start-up delay (100-230Vac input)
35ms rise time (nominal input; constant full current load; 0mF load capacitance)
75ms rise time (nominal input; constant full current load; 10mF load capacitance)

W60mm x H124mm x D117mm

60 mm

Aluminium housing

-25...+70 °C

2A (230Vac input; full 24Vdc output)
3.73A (120Vac input; full 24Vdc output)
4.34A (100Vac input; full 24Vdc output)
10A peak max. inrush (at 230Vac input)
10A peak max. inrush (at 120Vac input)
10A peak max. inrush (at 100Vac input)

(230Vac input; full output load) 23.2 W
(120Vac input; full output load) 23.7 W

(230Vac input) 0.57
(120Vac input) 0.59

Commercialized

CS10242

(output stage) 7000 μF

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
Class I Div. 2 HazLoc
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments
EN 61000-6-4 Emission for industrial environments
EN 55011 / EN 55022 class B Disturbance characteristics

(at 40°C; 5A output; 1AC 120Vac input) 99000 hours
(at 40°C; 5A output; 1AC 230Vac input) 118000 hours
(at 25°C; 5A output; 1AC 120Vac input) 281000 hours
(at 25°C; 5A output; 1AC 230Vac input) 305000 hours
(at 40°C; 10A output; 1AC 120Vac input) 50000 hours
(at 40°C; 10A output; 1AC 230Vac input) 75000 hours
(at 25°C; 10A output; 1AC 120Vac input) 141000 hours
(at 25°C; 10A output; 1AC 230Vac input) 213000 hours

AC 100-120 / 200-240V Auto-select Input
PFC Inductor Included - Fulfills EN 61000-3-2
Width only 60mm
Efficiency up to 91.2%
Easy fuse breaking due to high overload peak current
Full power between -25°C and +60°C
Minimal inrush current surge
3 Year warranty
The DIMENSION C-Line units are cost optimized power supplies without compromising quality reliability and performance. The C-Line is part of the DIMENSION power supply family existing alongside the high featured Q-Line. The CS10.242 includes all the essential basic functions and the devices have a power reserve of 20% for short-term peak power demands. The most important features are the small size high efficiency the wide temperature range and a PFC filter which fulfills the harmonic standard EN61000-3-2. The Auto-select input makes worldwide installation and usage very simple. Defects or system failures caused by wrongly set switches cannot occur. High immunity to transients and power surges as well as low electromagnetic emission and a large international approval package for a variety of applications makes this unit suitable for nearly every situation.

50mVpp (20Hz...20MHz; 50Ω)

638000h (at 40°C; 120Vac input; MTBF SN 29500 IEC 61709)
821000h (at 40°C; 230Vac input; MTBF SN 29500 IEC 61709)
1058000h (at 25°C; 120Vac input; MTBF SN 29500 IEC 61709)
1393000h (at 25°C; 230Vac input; MTBF SN 29500 IEC 61709)
447000h (at 40°C; 120Vac input; MTBF MIL HDBK 217F)
472000h (at 40°C; 230Vac input; MTBF MIL HDBK 217F)
628000h (at 25°C; 120Vac input; MTBF MIL HDBK 217F)
653000h (at 25°C; 230Vac input; MTBF MIL HDBK 217F)