PULS

Power supply unit

DIMENSION series

CD-series

Power supply unit (PSU) / DC/DC-Converter
20% power reserve

galvanic isolation
20% power reserve

18Vdc-32.4Vdc (24Vdc nom.)
14.4-18Vdc for max. 60s

"DC-OK" LED

DC

12A (at 5Vdc; -25...+45°C)
10A (at 5Vdc; +45...+60°C)
1.25W/+60°C...+70°C (derating)

60W (-25...+45°C)
50W (-25...+60°C)

5Vdc-5.5Vdc (adjustable)
250mV turn-ON overshoot

10ms (buffer time at 24Vdc input)

screw-clamp connections

output overvoltage protection (5.9Vdc typ. / 6.1Vdc max.)
Output protection -- electronically protected against overload / no-load / short-circuits
Short-circuit current -- min. 12A continuous current (short circuit impedance 10mΩ) / max. 20A continuous current (short circuit impedance 10mΩ)
Over-temperature protection -- output shutdown with automatic restart
Series / parallel operation -- The DC/DC-converter can be paralleled to increase the output power. Devices can be paralleled for 1+1 redundancy to gain higher system availability. Daisy chaining (jumping from 1 DC/DC-converter output to the next) is allowed as long as the average output current through 1 terminal pin does not exceed 25A. If the current is higher use a separate distribution terminal block.
Back-feeding loads max. 5.6V -- The unit is resistant and does not show malfunctioning when a load feeds back voltage to the power supply. It does not matter whether the power supply is ON or OFF. The absorbing energy can be calculated according to the built-in large sized output capacitor.
Reverse polarity protection

0.815 (5.1Vdc 10A input)

DIN rail mounting

420ms start-up delay (24Vdc input)
300ms rise time (nominal input; constant full current load; 0mF load capacitance)
350ms rise time (constant full current load; 8mF load capacitance)

IP20

W32mm x H124mm x D102mm

32 mm

Aluminium housing

-25...+70 °C

2.6A (24Vdc input; full 5Vdc output; 10A)
1.6A peak max. inrush (at 24Vdc input)

(24Vdc input; 5.1V output load; 10A) 11.5 W
(24Vdc input; 5.1V output load; 5A) 5.5 W

Commercialized

CD5051

(output stage) 16000 μF

CE marking
IECEE CB Scheme IEC 60950-1
UL 508
UL 60950-1
EN 61000-6-1
EN 61000-6-2
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-5
EN 61000-4-6
EN 61000-6-3
EN 61000-6-4
IEC/CISPR 16-1-2
IEC/CISPR 16-2-1
EN 55011
EN 55032

24VDC-input
Isolated 5Vdc output
Efficiency up to 81.5%
Width only 32mm
20% Output power reserve
Full power between -25°C and +60°C
Soft-start function included
Minimal inrush current surge
Reverse input polarity protection
3 Year warranty
The Dimension CD-Series offer DIN-rail DC/DC converters in the 50-120W output power range in a very compact housing.
These DC/DC converters can also to run on a battery or similar sources.
The CD5.051 converts 24Vdc on the input to 5Vdc at the output.
The device includes all the essential basic functions and has a power reserve of 20% included.
This extra power can be used continuously up to +45°C.
The output is electrically isolated from the input in a safe way.
The input is protected against reversed voltages and contains a soft start function.

50mVpp (20Hz...20MHz; 50Ω)