PULS

Power supply unit

DIMENSION series

C-series

AC/DC Power supply unit (PSU) / converter
20% power reserve

ATEX approval
20% power reserve
DC-OK rly. contact output

85Vac-264Vac (100Vac / 110Vac / 120Vac / 200Vac / 208Vac / 220Vac / 230Vac / 240Vac nom.; 47-63Hz)
84Vac turn-ON voltage
39Vac shutdown voltage at 5A
53Vac shutdown voltage at 10A
74Vac shutdown voltage at 20A

"DC-OK" LED

Single-phase (1AC)

20A (at 24Vdc)

576W (PowerBoost; ambient less than 45°C)
480W (ambient less than 60°C)

24Vdc-28Vdc (adjustable)
200mV turn-ON overshoot

26ms (buffer time at 120/230Vac input)

screw-clamp connections

output overvoltage protection (30.5Vdc typ. / 32Vdc max.)
Overload / short-circuit current -- 15A average (R.M.S.) current / min. 70A (typ. 100A) up to 15ms at load impedance <10mΩ
Series / parallel operation -- Power supplies can be paralleled to increase the output power. The output voltage of all power supplies shall be adjusted to the same value (+/-100mV) in Single use mode with the same load conditions on all units
Back-feeding loads max. 35V -- The unit is resistant and does not show malfunctioning when a load feeds back voltage to the power supply. It does not matter whether the power supply is ON or OFF. The absorbing energy can be calculated according to the built-in large sized output capacitor.

0.94 (230Vac input)
0.927 (120Vac input)
0.92 (100Vac input)

DIN rail mounting

850ms start-up delay (100-230Vac input)
85ms rise time (nominal input; constant full current load; 0mF load capacitance)
150ms rise time (nominal input; constant full current load; 20mF load capacitance)

IP20

W65mm x H124mm x D127mm

65 mm

Aluminium housing

-25...+70 °C

2.33A (230Vac input; full 24Vdc output)
4.36A (120Vac input; full 24Vdc output))
5.25A (100Vac input; full 24Vdc output))
13A peak max. inrush (at 230Vac input)
13A peak max. inrush (at 120Vac input)

30.6 W

(230Vac input) 0.95
(120Vac input) 0.99

Commercialized

CPS20241

(output stage) 7000 μF

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
IECEx
ATEX
Class I Div. 2 HazLoc
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments
EN 61000-6-4 Emission for industrial environments
EN 55011 / EN 55022 class B Disturbance characteristics

(at 40°C; 10A output; 1AC 120Vac input) 150000 hours
(at 40°C; 10A output; 1AC 230Vac input) 168000 hours
(at 25°C; 10A output; 1AC 120Vac input) 425000 hours
(at 25°C; 10A output; 1AC 230Vac input) 475000 hours
(at 40°C; 20A output; 1AC 120Vac input) 70000 hours
(at 40°C; 20A output; 1AC 230Vac input) 88000 hours
(at 25°C; 20A output; 1AC 120Vac input) 198000 hours
(at 25°C; 20A output; 1AC 230Vac input) 249000 hours
(at 40°C; 24A output; 1AC 120Vac input) 46000 hours
(at 40°C; 24A output; 1AC 230Vac input) 61000 hours
(at 25°C; 24A output; 1AC 120Vac input) 130000 hours
(at 25°C; 24A output; 1AC 230Vac input) 171000 hours

AC 100-240V Wide-range input
Width only 65mm
Efficiency up to 94%
ATEX and IECEx Approved
-C1 Version with conformal coated PC-board
Excellent partial load efficiency
20% Output power reserve
Safe HiccupPLUS overload mode
Easy Fuse Breaking due to High Overload Current
Active power factor correction (PFC)
Minimal inrush current surge
Full power between -25°C and +60°C
DC-OK relay contact
Current sharing feature for parallel use
3 Year warranty
The Dimension C-Series are cost optimized power supplies without compromising quality reliability and performance.
The C-Series is part of the DIMENSION power supply family
The most outstanding features of CPS20.241 are the high efficiency electronic inrush current limitation active PFC wide operational temperature range.
The small size is achieved by a synchronous rectification and further technological design details.
The C-Series includes all the essential basic functions
The devices have a power reserve of 20% included which may even be used continuously at temperatures up to +45°C.
Additionally the CPS20.241 can deliver about 4 times the nominal output current for 15ms which helps to trip fuses on faulty output branches.
High immunity to transients and power surges as well as low electromagnetic emission; a DC-OK relay contact and a large international approval package for a variety of applications makes this unit suitable for nearly every situation.

50mVpp (20Hz...20MHz; 50Ω)

484000h (at 40°C; 120Vac input; MTBF SN 29500 IEC 61709)
537000h (at 40°C; 230Vac input; MTBF SN 29500 IEC 61709)
796000h (at 25°C; 120Vac input; MTBF SN 29500 IEC 61709)
882000h (at 25°C; 230Vac input; MTBF SN 29500 IEC 61709)
261000h (at 40°C; 120Vac input; MTBF MIL HDBK 217F)
290000h (at 40°C; 230Vac input; MTBF MIL HDBK 217F)
361000h (at 25°C; 120Vac input; MTBF MIL HDBK 217F)
395000h (at 25°C; 230Vac input; MTBF MIL HDBK 217F)
57000h (at 40°C; 120Vac input; MTBF MIL HDBK 217F)
64000h (at 40°C; 230Vac input; MTBF MIL HDBK 217F)
77000h (at 25°C; 120Vac input; MTBF MIL HDBK 217F)
86000h (at 25°C; 230Vac input; MTBF MIL HDBK 217F)