PULS

Power supply unit

FIEPOS eFused series

FPS300 eFused NEC Class 2 1AC series

Field AC/DC Power supply unit (PSU) / converter

3 individually protected switchable NEC Class 2 outputs
IO-Link interface

85Vac-264Vac (100Vac / 110Vac / 120Vac / 200Vac / 208Vac / 220Vac / 230Vac / 240Vac nom.; 47-63Hz)
264-300Vac input overvoltage (for 500ms max.)
80Vac turn-ON voltage
70Vac shutdown voltage

88Vdc-360Vdc (100Vdc / 110Vdc / 120Vdc / 127Vdc / 200Vdc / 220Vdc / 250Vdc nom.)

LED bar-graph (20-200% load)
"Status" LED
3-color LEDs x 3 (OUT1-3 status)

Single-phase (1AC) or DC

output currents as per NEC Class II

360W (-25...+45°C)
300W (-25...+55°C)
150W at +70°C (derates linearly between +55°C and +70°C)
600W short-term (for 5s; at -25...+55°C)
300W short-term (for 5s; at +55...+70°C)

24Vdc-28Vdc (adjustable)
200mV turn-ON overshoot

44ms (buffer time at 120/230Vac input)

3-pin 7/8" male connector (INPUT; X1)
5-pin M12 connector (IO-Link interface; X2)
3 x 4-pin 7/8" connectors (OUTPUT; X3/X4/X5)

output overvoltage protection (31.8Vdc typ. / 32.5Vdc max.)
Overload / short-circuit current -- individual inverse time curve for each output (eFused electronic protection; see datasheet for details)
Over-temperature protection -- Output shutdown with automatic restart. Temperature sensors are installed on critical components inside the unit and turn the unit OFF in safety critical situations which can happen e.g. when ambient temperature is too high ventilation is obstructed or the derating requirements are not followed. There is no correlation between the operating temperature and turn-OFF temperature since this is dependent on input voltage load and installation methods.
Series / parallel operation -- not possible
Back-feeding loads max. 35V / 4J -- The unit is resistant and does not show a malfunction when a load feeds back voltage to the power supply. It does not matter whether the power supply is ON or OFF. For all 3 outputs in total

0.957 (230Vac input)
0.943 (120Vac input)

IO-Link

Hanging and fixing via integrated keyholes or by screw mounting

2s start-up delay (100-230Vac input)
22ms rise time (nominal input; constant full current load; 0mF load capacitance)
48ms max. rise time (nominal input; constant full current load; 12.5mF load capacitance)

IP65
IP67

W181mm x H183mm x D59mm

Aluminium housing

-25...+55 °C
(with linear derating) +55...+70 °C

1.68A (230Vac input; full output)
3.2A (120Vac input; full output)
3.98A (100Vac input; full output)
2.9A (110Vdc input; 24Vdc / full output)
1.04A (300Vdc input; 24Vdc / full output)
6A peak inrush (at 230Vac input)
2.6A peak inrush (at 120Vac input)

(230Vac input; full output load) 13.5 W
(120Vac input; full output load) 18.1 W

(230Vac input) 0.97
(120Vac input) 0.99

Commercialized

FPS300246049102

(output stage) 12500 μF

CE marking
cULus Listed
NEC Class II
IECEE CB Scheme IEC 62368-1 / IEC 61010-2-201
IEC 61010
IEC 60950-1
SEMI F47
VDMA 24364
ROHS
REACH
WEEE
IEC/EN 61558-2-16

IP65/67 Degree of protection
600W peak 5s
1AC 100-240V wide-range input
3 switchable outputs
Outputs for actors and sensors shares one channel
95.7% full load and excellent partial load efficiencies
DIN rail mounting possible (option "D")
Output connected to PE (PELV)
Version without connection to PE on request
Large output capacitors
Not potted
Negligible low input inrush current surge
Full power between -25°C and +55°C
IO-Link
3 years warranty

50mVpp (20Hz...20MHz; 50Ω)