Schneider Electric

Telemecanique

TeSys

LTMR (TeSys T)

(Fault statistics) Protection fault counters
(Fault statistics) Protection alarm counters
(Fault statistics) Diagnostic fault counters
(Fault statistics) Motor control function counters
(Fault statistics) Motor control function counters
(Fault statistics) Fault history
(Fault diagnostics) Internal watchdog fault
(Fault diagnostics) Controller internal temperature
(Fault diagnostics) Temperature sensor connection
(Fault diagnostics) Current connection
(Fault diagnostics) Voltage connection
(Fault diagnostics) Motor control commands (start; stop; run check back and stock check back)
(Fault diagnostics) Control configuration checksum
(Fault diagnostics) Loss of communication
(Motor statistics) Number of motor control commands (O.1/O.2 starts)
(Motor statistics) Operating time
(Motor statistics) Number of starts/hour
(Motor statistics) Last start I max.
(Motor statistics) Duration of last start
(Thermal overload statistics) Time to trip
(Thermal overload statistics) Time to restart
(System operating statistics) Run; On; Start; alarm; fault

(Phase imbalance) 0-15% - 0.2-20s
(Phase failure) 0.1-30s
(Phase reversal) A-B-C
(Phase reversal) A-C-B
(Voltage variation) Minimum 70-99% - 0.2-25s
(Voltage variation) Maximum 101-115% - 0.2-25s
(Load shedding) 68-115% - 1-9999s
(Power variations) 20-800% - 1-100s
(Variation of Cos phi) 0-1s - 1-25s

(AC) 100-240 V

Commercialized

690 V

EN 60947-4-1
IACS E10
IEC 60947-4-1
UL 508
CSA C22.2 No 14

3 measurement current transformers
(control circuit) Screw-clamp

Phase to balance (1 alarm; 1 trip) monitors the symmetry of voltage between phases. To be used for imbalance < 40 % of the average voltage.
Phase failure (1 alarm; 1 trip) monitors the symmetry of voltage between phases. To be used for imbalance > 40 % of the average voltage.
Phase reversal (1 trip) signals when the phase sequence is different from the defied sequence (motor stopped).
Voltage variation (1 alarm; 1 trip) Min/max voltage limits; monitors voltage variations around preset thresholds.
Load shedding; opens outputs O.1 and O.2 if voltage drops below a preset threshold.
Power variation (1 alarm; 1 trip) Min/max power limits; monitors power variations around preset thresholds.
Variations of Cos phi (1 alarm; 1 trip) Min/max limits of Cos phi; monitors variations of Cos phi around preset thresholds.

(Measurement) Frequency 0-100Hz
(Measurement) Voltage between phases 0-830V
(Measurement) Voltage imbalance between phases 0-200%
(Measurement) Active power 0-6553.5kW
(Measurements) Reactive power 0-6553.5 kVAr
(Measurements) Cos phi (power factor) 0-100
(Measurements) Active power consumption 0-400kWh
(Measurements) Reactive power consumption 0-400kVArh