PULS

Protection unit

DIMENSION series

PISA-B series

8-channel protection module (1input + 8 outputs)

digital coded signal output

18Vdc-30Vdc (24Vdc)
19.6Vdc (required input voltage for turning on the outputs)

40A max. (12A + 12A + 10A + 10A + 10A + 10A + 10A + 10A; -25...+40°C)
1A/+60°C...+70°C (derating; each channel)

screw-clamp connections

short-circuit protection (10ms shutdown time)
current limitation 200%

DIN rail mounting

W52mm x H124mm x D130mm

52 mm

Aluminium housing

-25...+70 °C

(turn-on delay of output) 750 ms

(no output load) 1 W
(8x5A output load) 10.8 W

Commercialized

PISAB812B4

(Channel 1+2) 125mV / 0.125 V
(Channel 3+4+5+6+7+8) 165mV / 0.165 V

CE marking
REACH Directive
WEEE Directive
RoHS 2
IEC 61010
IEC 62368
UL 61010
UL 2367
VDMA 24364

Eight Current Controlled Outputs
Adjustable Output Currents for Each Channel
Selective Tripping of Overloaded Channels
Compatible even with large Capacitive Loads
Output Currents Displayed Live on LED Matrix
Remote Reset or Reset via Pushbuttons
Common Signaling Relay Contact for Tripped
Channels (PISA-B-812-B1)
Digital Coded Signal Output for Tripped Channels
(PISA-B-812-B4)
Parameter Settings can be Locked by PIN-Code
ON/OFF Feature for Each Individual Output
Easy Wiring - Distribution Terminals for Negative Pole
3 Year warranty
The PISA-B devices are DIN rail mountable eight channel protection modules with integrated electronic fuses for 24V systems. They distribute the current of a large power source to eight output channels each of lower current and therefore allowing for smaller wires to be used. The output current of each channel can be set individually. Channel 1 and 2 are optimized for loads with large input capacitances. Connect such loads to these channels to avoid false tripping or unexpected switch-OFF such loads. The PISA-B-812-B1 is equipped with a common tripping signaling relay contact that reports tripped channels while the PISA-B-812-B4 has a digital coded signal output built in for this function. All PISA-B devices are equipped with push-in terminals which are optimized for automated wiring. The mechanically robust housing is made of a high-grade reinforced moulded material on the front and of an Aluminium body which permits surrounding temperatures up to +70°C.