PULS

Power supply unit

DIMENSION series

Q-series

AC/DC Power supply unit (PSU) / converter
50% power reserve

50% power reserve
DC-OK rly. contact output

85Vac-264Vac (100Vac / 110Vac / 120Vac / 200Vac / 208Vac / 220Vac / 230Vac / 240Vac nom.; 47-63Hz)
81Vac turn-ON voltage
63Vac shutdown voltage (steady-state; no load)
55Vac shutdown voltage (dynamic value)

88Vdc-188Vdc (100Vdc / 110Vdc / 120Vdc / 127Vdc nom.)

"DC-OK" LED

Single-phase (1AC) or DC

5A (at 48Vdc)
4.3A (at 56Vdc)
6W/+60°C...+70°C (derating)

240W
360W short-term (for 4s)

48Vdc-56Vdc (adjustable)
100mV turn-ON overshoot

28ms (buffer time at 230Vac input)
27ms (buffer time at 120Vac input)

spring-clamp connections

output overvoltage protection (58Vdc typ. / 60Vdc max.)
Overload / short-circuit current -- min. 3A (max. 7A) load impedance <200mΩ
Series / parallel operation -- Power supplies can be paralleled to increase the output power. The output voltage of all power supplies shall be adjusted to the same value (+/-100mV) in Single use mode with the same load conditions on all units
Back-feeding loads max. 58V -- The unit is resistant and does not show malfunctioning when a load feeds back voltage to the power supply. It does not matter whether the power supply is ON or OFF. The absorbing energy can be calculated according to the built-in large sized output capacitor.

0.92 (230Vac input)
0.912 (120Vac input)
0.904 (100Vac input)

DIN rail mounting

340-800ms start-up delay (100-230Vac input)
8ms rise time (nominal input; constant full current load; 0mF load capacitance)
15ms rise time (nominal input; constant full current load; 5mF load capacitance)

W60mm x H124mm x D117mm

60 mm

Aluminium housing

-25...+70 °C

10A peak max. inrush (at 120Vac input)
10A peak max. inrush (at 230Vac input)

(230Vac input; full output load) 20.9 W
(120Vac input; full output load) 23.2 W

(230Vac input) 0.92
(120Vac input) 0.98

Commercialized

QS10481

(output stage) 3000 μF

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
Class I Div. 2 HazLoc
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments
EN 61000-6-4 Emission for industrial environments
EN 55011 / EN 55022 class B Disturbance characteristics

(at 40°C; 5A output; 1AC 120Vac input) 67000 hours
(at 40°C; 5A output; 1AC 230Vac input) 81000 hours
(at 40°C; 2.5A output; 1AC 120Vac input) 112000 hours
(at 40°C; 2.5A output; 1AC 230Vac input) 118000 hours
(at 25°C; 26.7A output; 1AC 120Vac input) 188000 hours
(at 25°C; 26.7A output; 1AC 230Vac input) 228000 hours

AC 100-240V Wide-range input
Width only 60mm
Efficiency up to 92%
150% (360W) Peak Load Capability
Easy fuse tripping due to high overload current
Active power factor correction (PFC)
Negligible low Inrush Current Surge
Short-term Operation down to 60Vac and up to 300Vac
Full power between -25°C and +60°C
DC-OK relay contact
Quick-connect Spring-clamp Terminals
3 Year warranty
The most outstanding features of this Dimension Q Series DIN-rail power supply are the high efficiency and the small size which are achieved by a synchronous rectification and further novel design details. The QSeries is part of the Dimension family existing alongside the lower featured C-Series. With short-term peak power capability of 150% and built-in large sized output capacitors these features help start motors charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission makes usage in nearly every environment possible. The integrated output power manager a wide range input voltage design and virtually no input inrush current make installation and usage simple. Diagnostics are easy due to the dry DC-ok contact a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes this unit suitable for nearly every situation.

100mVpp (20Hz...20MHz; 50Ω)

566000h (at 40°C; 120Vac input; MTBF SN 29500 IEC 61709)
606000h (at 40°C; 230Vac input; MTBF SN 29500 IEC 61709)
979000h (at 25°C; 120Vac input; MTBF SN 29500 IEC 61709)
1048000h (at 25°C; 230Vac input; MTBF SN 29500 IEC 61709)
349000h (at 40°C; 120Vac input; MTBF MIL HDBK 217F)
349000h (at 40°C; 230Vac input; MTBF MIL HDBK 217F)
478000h (at 25°C; 120Vac input; MTBF MIL HDBK 217F)
478000h (at 25°C; 230Vac input; MTBF MIL HDBK 217F)