PULS

Power supply unit

DIMENSION series

Q-series

AC/DC Power supply unit (PSU) / converter
50% power reserve

50% power reserve
DC-OK rly. contact output

85Vac-264Vac (100Vac / 110Vac / 120Vac / 200Vac / 208Vac / 220Vac / 230Vac / 240Vac nom.; 47-63Hz)
77Vac turn-ON voltage
73Vac shutdown voltage (steady-state; no load)
53Vac shutdown voltage (dynamic value)

88Vdc-188Vdc (100Vdc / 110Vdc / 120Vdc / 127Vdc nom.)

"DC-OK" LED

Single-phase (1AC) or DC

13.3A (at 36Vdc)
11.4A (at 42Vdc)

480W
720W short-term (for 4s)

36Vdc-42Vdc (adjustable)
100mV turn-ON overshoot

51ms (buffer time at 230Vac input)
32ms (buffer time at 120Vac input)

spring-clamp connections

output overvoltage protection (50Vdc typ. / 54Vdc max.)
active (input inrush current limiter)
Overload / short-circuit current -- min. 20A (max. 27A) load impedance <75mΩ
Series / parallel operation -- Power supplies can be paralleled to increase the output power. The output voltage of all power supplies shall be adjusted to the same value (+/-100mV) in Single use mode with the same load conditions on all units
Back-feeding loads max. 48V -- The unit is resistant and does not show malfunctioning when a load feeds back voltage to the power supply. It does not matter whether the power supply is ON or OFF. The absorbing energy can be calculated according to the built-in large sized output capacitor.

0.94 (230Vac input)
0.925 (120Vac input)
0.917 (100Vac input)

DIN rail mounting

640-660ms start-up delay (100-230Vac input)
80ms rise time (nominal input; constant full current load; 0mF load capacitance)
85ms rise time (nominal input; constant full current load; 13mF load capacitance)

W82mm x H124mm x D127mm

82 mm

Aluminium housing

-25...+70 °C

13A peak max. inrush (at 120Vac input)
13A peak max. inrush (at 230Vac input)

(230Vac input; full output load) 30.6 W
(120Vac input; full output load) 38.9 W

(230Vac input) 0.9
(120Vac input) 0.95

Commercialized

QS20361

(output stage) 8500 μF

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
Class I Div. 2 HazLoc
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments
EN 61000-6-4 Emission for industrial environments
EN 55011 / EN 55022 class B Disturbance characteristics

(at 40°C; 13.3A output; 1AC 120Vac input) 61000 hours
(at 40°C; 13.3A output; 1AC 230Vac input) 84000 hours
(at 40°C; 6.7A output; 1AC 120Vac input) 127000 hours
(at 40°C; 6.7A output; 1AC 230Vac input) 146000 hours
(at 25°C; 13.3A output; 1AC 120Vac input) 171000 hours
(at 25°C; 13.3A output; 1AC 230Vac input) 236000 hours

AC 100-240V Wide-range input
Width only 82mm
Efficiency up to 94%
150% (720W) Peak Load Capability
Safe HiccupPLUS overload mode
Easy fuse tripping due to high overload current
Active power factor correction (PFC)
Negligible low Inrush Current Surge
Short-term Operation down to 60Vac and up to 300Vac
Full power between -25°C and +60°C
DC-OK relay contact
Quick-connect Spring-clamp Terminals
3 Year warranty
The most outstanding features of this Dimension Q Series DIN-rail power supply are the high efficiency and the small size which are achieved by a synchronous rectification and further novel design details. With short-term peak power capability of 150% and built-in large sized output capacitors these features help start motors charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission makes usage in nearly every environment possible. The integrated output power manager a wide range input voltage design and virtually no input inrush current make installation and usage simple. Diagnostics are easy due to the dry DC-ok contact a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes this unit suitable for nearly every situation.

100mVpp (20Hz...20MHz; 50Ω)

441000h (at 40°C; 120Vac input; MTBF SN 29500 IEC 61709)
469000h (at 40°C; 230Vac input; MTBF SN 29500 IEC 61709)
799000h (at 25°C; 120Vac input; MTBF SN 29500 IEC 61709)
840000h (at 25°C; 230Vac input; MTBF SN 29500 IEC 61709)
215000h (at 40°C; 120Vac input; MTBF MIL HDBK 217F)
229000h (at 40°C; 230Vac input; MTBF MIL HDBK 217F)
288000h (at 25°C; 120Vac input; MTBF MIL HDBK 217F)
308000h (at 25°C; 230Vac input; MTBF MIL HDBK 217F)