PULS

Power supply unit

DIMENSION series

Q-series

AC/DC Power supply unit (PSU) / converter
50% power reserve

ATEX approval
50% power reserve
DC-OK rly. contact output

85Vac-264Vac (100Vac / 110Vac / 120Vac / 200Vac / 208Vac / 220Vac / 230Vac / 240Vac nom.; 47-63Hz)
164Vac turn-ON voltage
151Vac shutdown voltage

"DC-OK" LED

Single-phase (1AC)

40A (at 24Vdc)
34.3A (at 28Vdc)

960W (at 24Vdc and 28Vdc)
1440W short-term (for 4s)

24Vdc-28Vdc (adjustable)
100mV turn-ON overshoot

27ms (buffer time at 230Vac input)
27ms (buffer time at 120Vac input)

screw-clamp connections

output overvoltage protection (30Vdc typ. / 32Vdc max.)
active (input inrush current limiter)
Overload / short-circuit current -- min. 60A (max. 70A) load impedance <25mΩ
Series / parallel operation -- Power supplies can be paralleled to increase the output power. The output voltage of all power supplies shall be adjusted to the same value (+/-100mV) in Single use mode with the same load conditions on all units
Back-feeding loads max. 35V -- The unit is resistant and does not show malfunctioning when a load feeds back voltage to the power supply. It does not matter whether the power supply is ON or OFF. The absorbing energy can be calculated according to the built-in large sized output capacitor.

0.946 (230Vac input)
0.936 (120Vac input)
0.932 (100Vac input)

DIN rail mounting

700-800ms start-up delay (400-480Vac input)
15ms rise time (nominal input; constant full current load; 0mF load capacitance)
18ms rise time (nominal input; constant full current load; 40mF load capacitance)

W125mm x H124mm x D127mm

125 mm

Aluminium housing

-25...+70 °C

22A peak max. inrush (at 120Vac input)
16A peak max. inrush (at 230Vac input)

(230Vac input; full output load) 54.8 W
(120Vac input; full output load) 65.6 W

(230Vac input) 0.99
(120Vac input) 0.99

Commercialized

QS40241

(output stage) 10200 μF

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
IECEx
ATEX
Class I Div. 2 HazLoc
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments
EN 61000-6-4 Emission for industrial environments
EN 55011 / EN 55022 class B Disturbance characteristics

(at 25°C; 20A output; 1AC 120Vac input) 291000 hours
(at 25°C; 20A output; 1AC 230Vac input) 317000 hours
(at 40°C; 20A output; 1AC 120Vac input) 103000 hours
(at 40°C; 20A output; 1AC 230Vac input) 112000 hours
(at 25°C; 40A output; 1AC 120Vac input) 181000 hours
(at 25°C; 40A output; 1AC 230Vac input) 238000 hours
(at 40°C; 40A output; 1AC 120Vac input) 64000 hours
(at 40°C; 40A output; 1AC 230Vac input) 84000 hours

AC 100-240V Wide-range input
Width only 125mm Weight only 1.9kg
94.6% Full Load and Excellent Partial Load Efficiencies
Version-C2 with Partially Conformal Coated PCB
50% BonusPower 1440W for up to 4s
110A High Peak Current for 10ms for Easy Fuse Tripping
Safe HiccupPLUS overload mode
Active PFC (Power Factor Correction)
Negligible low input inrush current surge
Full power between -25°C and +60°C
Current sharing feature for parallel use
Internal Data Logging for Troubleshooting Included.
Remote Control of Output Voltage
DC-OK relay contact
Shut-down Input
ATEX and IECEx Approved
3 Year warranty
The most outstanding features of this Dimension QS40.241 DIN-rail power supply are the extremely high efficiency and the small size which are achieved by a synchronous rectification a bridgeless PFC circuit and additional unique design details. Large power reserves of 150% and built-in large sized output capacitors support the starting of heavy loads such as DC motors or capacitive loads. In many cases this allows the use of a unit from a lower wattage class which saves space and money. High immunity to transients and power surges as well as low electromagnetic emissions makes usage in nearly every environment possible. The integrated input fuse as well as the near 0 input inrush current make installation and usage simple. Diagnostics are easy due to the DC-OK relay a green DC-OK LED and the red overload LED. A large international approval package for a variety of applications makes this unit suitable for nearly every application.

100mVpp (20Hz...20MHz; 50Ω)

481000h (at 25°C; 120Vac input; MTBF SN 29500 IEC 61709)
537000h (at 25°C; 230Vac input; MTBF SN 29500 IEC 61709)
269000h (at 40°C; 120Vac input; MTBF SN 29500 IEC 61709)
300000h (at 40°C; 230Vac input; MTBF SN 29500 IEC 61709)
171000h (at 25°C; 120Vac input; MTBF MIL HDBK 217F Ground Benign)
183000h (at 25°C; 230Vac input; MTBF MIL HDBK 217F Ground Benign)
127000h (at 40°C; 120Vac input; MTBF MIL HDBK 217F Ground Benign)
137000h (at 40°C; 230Vac input; MTBF MIL HDBK 217F Ground Benign)
36000h (at 25°C; 120Vac input; MTBF MIL HDBK 217F Ground Fixed)
39000h (at 25°C; 230Vac input; MTBF MIL HDBK 217F Ground Fixed)
27000h (at 40°C; 120Vac input; MTBF MIL HDBK 217F Ground Fixed)
30000h (at 40°C; 230Vac input; MTBF MIL HDBK 217F Ground Fixed)