PULS

Uninterruptible Power Supply (UPS)

DIMENSION series

UB-series

DC/DC Uninterruptible Power Supply (UPS) control module

external batt.
batt. temperature control
50% power reserve
Green status LED

22.5Vdc-30Vdc (24Vdc nom.)

"Status" LED

DC

10A (at 22.5Vdc)
15A (in bfr. mode less than 5s full output voltage)
Output 1 in normal mode = 15A
Output 1 in buffer mode = 10A/15A (360W)

360W (at 24Vdc)
240W/360W (buffer mode)

22.5Vdc (regulated) in bfr. mode
23Vdc turn-ON

spring-clamp connections

output overvoltage protection (32Vdc typ. / 35Vdc max.)
Overload / short-circuit current -- min. 17.9A (max. 21A) at load impedance <100mΩ
Do not use the DC-UPS in parallel to increase the output power. However 2 units of the DC-UPS can be paralleled for 1+1 redundancy to gain a higher system reliability.

0.978 (24Vdc input)

DIN rail mounting

W49mm x H124mm x D117mm

Aluminium housing

-25...+50 °C

Ready
Buffering
Inhibit
Replace Battery

2A (24Vdc input)
2.7A max. (24Vdc input)

battery 12V; 17-130Ah

(24Vdc input; 0A output current) 2.9 W
(24Vdc input; 10A output current) 5.5 W

Commercialized

UB10242

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
IECEx
ATEX
Class I Div. 2 HazLoc
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments

(at 40°C; 10A output; 24Vdc input) 137400 hours
(at 40°C; 5A output; 24Vdc input) 15years / 131400 hours
(at 25°C; 10A output; 24Vdc input) 15years / 131400 hours

Requires Only 1 12V Battery for a 24V Output
Allows Batteries Between 17Ah and 130Ah
Battery Charging with Temperature Tracking
Stable Output Voltage in Buffer Mode
Superior Battery Management for Longest Battery Life
Comprehensive Diagnostic and Monitoring Functions
Replace Battery Signal Included
Electronically Overload and Short Circuit Protected
50% Power Reserves
3 Year warranty
This uninterruptible power supply (UPS) controller UB10.242 is an addition to standard 24V power supplies to bridge power failures of remote or emergency systems which must be kept fully in operation for e.g. 72 hours. The DC-UPS includes an internal temperature sensor and a professional battery management system which charges and monitors the battery to achieve the longest battery service life as well as many diagnostic functions that ensure a reliable operation of the entire system. A unique feature of the UB10 Series is that only 1 12V battery is required to buffer the 24V output. This makes matching batteries unnecessary and allows a precise battery charging and testing.

20mVpp (20Hz...20MHz; 50Ω)

886000h (at 40°C; 24Vdc input; MTBF SN 29500 IEC 61709)
1482000h (at 25°C; 24Vdc input; MTBF SN 29500 IEC 61709)
397900h (at 40°C; 24Vdc input; MTBF MIL HDBK 217F)
545000h (at 25°C; 24Vdc input; MTBF MIL HDBK 217F)